ClimberSystem

From SpaceElevatorWiki.com
Revision as of 20:34, 26 June 2009 by Daniel Krause (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

Full System Design of Climber

The climber entails the most general engineering work and optimization of it will take time but produce direct returns in overall performance. This is basic engineering (thermal control, structural: mass, vibrations, materials) that can be done in ODE. All the components of the climber must be included:

  1. Rollers
  2. Structure
  3. Motors
  4. Electronics
  5. Solar Cells
  6. Get commercial parts

Specific Work

  1. Detailed 3D engineering model
    • Structural including natural frequencies, static and dynamic loading, wear points, mounting procedure,
    • Electrical layout
    • Energy budget
    • Mass budget
    • Thermal model
    • Component selection

Ongoing Work

Title:Open for Use:
  • Lead: Place Name Here
  • E-mail: Place E-mail Here
  • Focus: Write a brief line or two on what the page is to work on. This is so other might step up to help.
Title:Open for Use:
  • Lead: Place Name Here
  • E-mail: Place E-mail Here
  • Focus: Write a brief line or two on what the page is to work on. This is so other might step up to help.

<issues/>