Build: Difference between revisions

From SpaceElevatorWiki.com
Jump to navigationJump to search
Line 17: Line 17:


sudo apt-get install build-essential mesa-common-dev libsdl1.2 libsdl1.2-dev libgl1-mesa-dev libglu1-mesa-dev libsdl-image1.2 libsdl-image1.2-dev libalut-dev libopenal-dev plib1.8.4-dev freeglut3-dev
sudo apt-get install build-essential mesa-common-dev libsdl1.2 libsdl1.2-dev libgl1-mesa-dev libglu1-mesa-dev libsdl-image1.2 libsdl-image1.2-dev libalut-dev libopenal-dev plib1.8.4-dev freeglut3-dev
'''How to fix?'''
''configure: error: Can't find libX11. Please check config.log and if you can't solve the problem send the file to torcs-users@lists.sourceforge.net with the subject "torcs compilation problem"
''


= Etc. =
= Etc. =

Revision as of 10:20, 5 July 2008

Question

One thing we should think about is whether we should dump tons of C/C++ into the tree just to build it once so we can then call it from C#. Maybe we could just dump the few release DLLs into the system and save people from having to compile the mess.

We may change torcs, but likely not the Intel code, for example.

Coding stuff

Mercurial

Mercurial

Building Intel Code

File:Ubuntu 8.04 OpenCV Install Guide.odt

Building Torcs

sudo apt-get install build-essential mesa-common-dev libsdl1.2 libsdl1.2-dev libgl1-mesa-dev libglu1-mesa-dev libsdl-image1.2 libsdl-image1.2-dev libalut-dev libopenal-dev plib1.8.4-dev freeglut3-dev

How to fix?

configure: error: Can't find libX11. Please check config.log and if you can't solve the problem send the file to torcs-users@lists.sourceforge.net with the subject "torcs compilation problem"

Etc.